Post by SpoonKiller on Aug 10, 2005 21:26:39 GMT -5
Chanito's Custom Windshield
This is a great mod! It's relatively cheap, it looks great, it's fully functional and really easy to install. You can pick up a kit from Chanito over on Ruckus Central. You can email himfor details on how to pick one up by sending him a little email at: chanito27 @ bellsouth.net ....(remove the spaces when emailing, this is to prevent the account from getting spammed by auto spammers)
Tools you'll need:
Here's the quick install, just replace all of the previously listed tools with some 100MPH tape.
Here is box the windshield came in. Make sure you inspect the content and familiarize yourself with the instructions. The Lexan is shipped with a blue protective coating, go ahead and remove the coating from around the holes in the Lexan. Keep the rest of the coating on the Lexan, this will protect it from mishaps has you adjust it later on.
Here are the brackets and associated bolts. I added the neoprene washers, so they may not be included in your kit. They are about .25 at your local hardware store.
Clip the Brake Line Clips onto the frame of the headlights with the flat side facing forward and the holes up.
Loosely install the 8mm bolts in the windshield.
[BOLT][Metal Washer][Neoprene Washer][Lexan][Foam][Bracket][Nut]
Loosen the turn signals with the 14mm open ended wrench. Do not take them out, you just need enough space to slide the bracket in there.
Loosely attach the windshield to the brackets with the 12mm ratchet/socket and 12mm wrench.
Screw the machine screw to the bottom of the windshield, with the washer on the outside.
The windshield should be parallel to the battery cover, once you are satisfied with the position of the windshield begin gently tightening everything. Be carefull not to over tighten, you don't want to end up with a broken windshield this late in the game!
Remove the protective film and clean the Lexan with mild soap. That's it, very simple and easy installation!
The next step will be to add a tint!
* UPDATE - Tint will not work on Lexan!
This is a great mod! It's relatively cheap, it looks great, it's fully functional and really easy to install. You can pick up a kit from Chanito over on Ruckus Central. You can email himfor details on how to pick one up by sending him a little email at: chanito27 @ bellsouth.net ....(remove the spaces when emailing, this is to prevent the account from getting spammed by auto spammers)
Tools you'll need:
Here's the quick install, just replace all of the previously listed tools with some 100MPH tape.
Here is box the windshield came in. Make sure you inspect the content and familiarize yourself with the instructions. The Lexan is shipped with a blue protective coating, go ahead and remove the coating from around the holes in the Lexan. Keep the rest of the coating on the Lexan, this will protect it from mishaps has you adjust it later on.
Here are the brackets and associated bolts. I added the neoprene washers, so they may not be included in your kit. They are about .25 at your local hardware store.
Clip the Brake Line Clips onto the frame of the headlights with the flat side facing forward and the holes up.
Loosely install the 8mm bolts in the windshield.
[BOLT][Metal Washer][Neoprene Washer][Lexan][Foam][Bracket][Nut]
Loosen the turn signals with the 14mm open ended wrench. Do not take them out, you just need enough space to slide the bracket in there.
Loosely attach the windshield to the brackets with the 12mm ratchet/socket and 12mm wrench.
Screw the machine screw to the bottom of the windshield, with the washer on the outside.
The windshield should be parallel to the battery cover, once you are satisfied with the position of the windshield begin gently tightening everything. Be carefull not to over tighten, you don't want to end up with a broken windshield this late in the game!
Remove the protective film and clean the Lexan with mild soap. That's it, very simple and easy installation!
The next step will be to add a tint!
* UPDATE - Tint will not work on Lexan!