Mod - Lock Pass-Through

Here's one of the first mods that I did to my Ruckus when I first got it. Basically I wanted a nice clean way of getting my cable lock through the frame. So I decided to punch a hole through the plastic deck and put a grommet in there to get a nice clean look.

This is V1.0

What you'll need:
Hole grommets at least 3/4" preferably 1" or more, make sure your cable lock will clear it. $3.00 for three.
A hole saw drill attachment appropriate for the size grommet. $4.00.
A drill.
An exacto knife.

The stock plastic deck.

A hole grommet.

Drill a 1" hole through the deck. Make sure you know what's underneath the deck so you don't drill through anything important. Use an exacto knife to shave off loose bits of plastic.

Finished product.


Total time about 15 easy going minutes...

-------------------------------------------

V2.0 improves upon V1.0 by enlarging the hole so that it's easier to work the cable lock in there. The grommet in V1.0 made for a tight fit. In V2.0 I used a plastic part that you can pick up in most hardware stores and is used to get cables trhough a desk.

What you'll need:
Exacto knife
Computer desk hole thingy...