Post by bp on Jul 25, 2019 7:58:54 GMT -5
I have a 2011 NPS50 that is going into limp mode then shutting off.
After it shuts down I can restart it after some time has past. It will run fine for a few minutes then repeats limp mode.
I have check the coolant it is good and the coolant light never came on.
About a month ago I cleaned the crab and replaced the jets but it ran 50 plus miles before I started seeing limp mode.
It was suggested I reset the ECU but I haven't found a good post for that process.
I am looking for any advice that may help. Thanks BP
After it shuts down I can restart it after some time has past. It will run fine for a few minutes then repeats limp mode.
I have check the coolant it is good and the coolant light never came on.
About a month ago I cleaned the crab and replaced the jets but it ran 50 plus miles before I started seeing limp mode.
It was suggested I reset the ECU but I haven't found a good post for that process.
I am looking for any advice that may help. Thanks BP
